NOTE: This product has been superseded by the Control-it 5251.
The Control-it 5007 is a DIN rail mounting version of our popular 5001 converter. It is flexible and easy
to use. It provides a clean, reliable transmission medium, which is noise
resistant. It protects the PC or PLC from damage due to High voltage,
using optical isolation. It doesn't require specific software support
to run. It has RXD and
TXD lights making it easy to monitor communications passing through it.
It requires no configuration and it is powered from the RS232
and RS485 ports. You can connect several 5001 converters to the
same communications bus. It can run at any baudrate between 300 - 115200
Baud, and the baudrate is set automatically when data is received. It
even has automatic flow control!
Some Benefits of the 5007 Automatic
Converter:
Saves Time:
Requires no technical setup procedures
Standard RS232 software needs no modification to run a RS485
link
No jumper settings necessary
High Performance:
Guaranteed to work over a data range of 300 to 115200 bps
Very fast data turnaround. For 8 bit no parity: 0.2ms at 9600bps
Communication distance of up to 1.2km (4000 feet)
Versatile
Small size, lightweight unit
9 - 24 volt power supply
Works with any terminal software
Easy to Install:
Plugs directly into your PC serial port
RS232 side is supplied with a 500mm lead and a 9way female
connector
Screw terminal connector with strain relief for RS485
Separate transmit and receive lights show data flow
Safe:
Full optical isolation protects your computer from power spikes
Robust, sealed plastic unit
Microprocessor has watchdog protection, preventing the possibility
of the module holding the line on failure
Warranty:
Three years
Specifications for 5007:
80(L) * 25(W) * 75(H)
Enclosure
Robust ABS
Transmission Distance
1.2km (4000 feet)
85g
Operating temperature
32° to 140° F ( 0° to
50°C)
Storage temperature
-4° to 158° F (-20° to
70° C)
Humidity
15 to 90% relative non condensing
Isolation Voltage
1500V max transient (to EN 60950
: 1992)
Power
9-24Vdc unregulated
25mA at 12Vdc on RS485 side
RS232 side - Case
mounted DB9 female connector
RS485 side - Plugable 5
way screw terminal connector with strain relief 0.2-2.5mm2
(AWG 24-12)
Products 
