16 x 3-24VDC inputs.5040

Model 5040

Key Benefits
Time Saving:
Standard screwdriver connection to your wiring – no soldering or crimping needed
The test-mode features a simple command line for easy testing
Hot-swapping of I/O devices makes troubleshooting hassle free

5040 brochure

50×0 installation manual

50X0 software manual

High Performance:
Can count moving production units at up to 350 per second. Each input channel is an independent 16bit counter.
This module can be set to run at 3 times the speed of other units, delivering improved accuracy of process response
If speed is important, then addition of the 5100, 5101 or 5102 board in this series allows 10 times greater speed whilst maintaining accuracy
Output capability of 5A per output

Can be controlled from the serial port of any computer using the 5001 RS232-485 converter
Supports the industry standard OPTO22 communications protocol and inexpensive RS485 two wire network
The input terminals support a wide range of positive or negative switched pick-ups and sensors

Easy to Install:
Panel or DIN rail mountable, or can be stacked with a stacking kit
Well labelled, robust enclosure for simple installation
Can be used with most standard power adaptors
All connectors can be unplugged
The 5031 adaptor can be used for a further reduction of wiring complexity

Fully floating circuitry protects your computer from power spikes
Microprocessor controlled watchdog feature disables all outputs in the extremely unlikely event of processor failure

Built-in Reliability:
Designed to exceed international standards for noise immunity
Complete isolation of all comms and I/O sections minimises outside interference errors
21 LEDs and a comprehensive trouble-shooting guide for easy diagnosis of suspected system fault

Used In:
Security Access Devices
Entry and exit data
Counting of any kind
Location sensing of goods
Production line status
Many other applications


Unregulated supply 12V or 24Vdc
Max power consumption (12Vdc) 94mA
Max power consumption (24Vdc) 94mA
Comms power consumption 22mA
Communication network Isolated RS485
Communications protocol OPTO22 or memory mapped
Size in mm 172(w) x 120(h) x 30(d) (6.8″x 4.7″x 1.2″)
DIN rail adapter Add 32mm to depth (d)
DIN rail adapter Add 32mm to depth (d)
With 5031 adapter Add 40mm to height (h) and 8mm to depth (d)
Digital Inputs 16
Isolation voltage 1kVrms
Voltage range 3V to 30Vdc
Logic level 0 1V max
Logic level 1 3V – 30Vdc
Resistance 2k2